SPO Dimensions

SPO Series Single Point Load Cell

£50.00

Load cells for off center loads, suitable for example to build CE-M approved scales with a single load cell with maximum dimensions of 300×300 mm.


CAPACITIES (kg): 3, 5, 10, 15, 20, 30, 40.


OIML R60. C3 precision class.


Aluminium alloy. IP67 protection.

Clear

Product Description

MAIN FEATURES

  • C3 PRECISION CLASS
  • OFF CENTER LOAD COMPENSATED
  • ALUMINIUM ALLOY CONSTRUCTION
  • IP67 PROTECTION
  • MAX. CAPACITIES FROM 3 TO 40 kg
  • FOR PLATFORMS WITH DIMENSIONS UP TO 300 X 300 mm
  • SHIELDED CONNECTION CABLE
  • OIML AND TEST CERTIFICATES AVAILABLE UPON REQUEST

TECHNICAL FEATURES

  • Minimum load cell verification interval: Vmin = EMax/15.000
  • Maximum number of verification intervals: nLC = 3000
  • Full Scale Output: 2mV/V +/- 10%
  • Temperature effect on zero: 0,01% FS/10K
  • Temperature effect on full scale output: 0,001%FS /10K
  • Compensated Temperature Range: -10°C/+40°C
  • Operating Temperature Range: -10°C/+50°C
  • Creep error after 30 minutes: 0,01% F.S
  • Maximum tolerated excitation voltage: 15 VDC
  • Input Resistance: 300..500 Ohm
  • Output Resistance: 300..500 Ohm
  • Insulation Resistance: >2000 MOhm
  • Safe Overload: 150% F.S.
  • Ultimate Overload: 300% F.S.
  • 4-wire shielded cable, 40cm long, 3,2mm diameter

ATEX Version

  • The CCATEX certificate makes the load cell suitable for use in hazardous areas with protection methods according to:
    ATEX II 1G Ex ia IIC T6 (Ta -20÷+40°C) TX (Ta -20÷+65°C) Ga
    ATEX II 1D Ex ta IIIC TX°C (Ta -20÷+40°C) TX°C (Ta -20÷+65°C) Da IP65.
    The certificate includes the manual and the ATEX CE conformity declaration (available in EN, DE, FR, and IT).
  • IMPORTANT: the certificate refers to the single load cell. For systems with more load cells, it is necessary to order one certificate for each load cell.

Additional Information

Model:

SPO3 3kg, SPO5 5kg, SPO10 10kg, SPO15 15kg, SPO20 20kg, SPO30 30kg, SPO40 40kg