“WKPT” Electronics And Analogue Load Cells Kit For Weighbridges

From: £1,700.00

Weighbridges kit made up of 3590ET touch screen weight indicator with AF03 software for weighbridges, 6 or 8 stainless steel IP68 “RCPT” analogue load cells, complete with galvanized steel oscillating resting joints and junction box with surge arresters.

Clear
SKU: N/A Categories: ,

Product Description

“3590ET” INDICATOR

  • Touch screen, graphic, color display.
  • ABS waterproof IP65 case.
  • Integrated alibi memory for CE-M approved communication with printer and PC.
  • 3 serial ports, 2 RS232 and 1 RS485 for connection to printer, repeater and PC.
  • 2 inputs and 4 outputs.
  • “AF03” application software suitable for vehicles weighing and weighbridges management, with input/output products check.

“RCPT” ANALOGUE LOAD CELLS

  • Minimum load cell verification interval: Vmin = EMax / 10.000
  • Maximum number of load cell divisions: nLC = 3000 (C3)
  • Sensitivity: 2mV/V +/- 0,1%
  • Temperature effect on full scale: 0,002% /°C
  • Temperature effect on zero: 0,002% /°C
  • Compensated Temperature Range: -10°C/+40°C
  • Operating Temperature Range: -30°C/+70°C
  • Creep error after 30 minutes: 0,02% F.S.
  • Excitation voltage from 5 to 15 VDC
  • Input Resistance: 700 ± 20 Ohm
  • Output Resistance: 703 ± 7 Ohm
  • Zero Balance: +/-1% F.S.
  • Insulation Resistance: 5000 MOhm
  • Safe Overload: 150% F.S.
  • Ultimate Overload: 250% F.S.
  • 4-wire shielded cable, 14m long, 5mm diameter.

“JB10Q” JUCTION BOX

  • Junction box with polyester case.
  • IP65 protection degree or IP68 with the use of GELBOX anti condensation gel (optional, you need 600ml of gel).
  • Surge Arresters against electric discharges and disturbances.

Additional Information

Model:

WKPT630A, WKPT830A