The new Crosby Straightpoint ATEX WNI LoadSafe Compression Load cell approved to Ex ia II C T4 Ga for use in zone 0,1 & 2 hazardous and intrinsically safe load cell.
Using the latest Straightpoint WNI load cells, maintenance and repair costs are all but eliminated due to the absence of cables and connectors, and the products flexibility opens the door to a large number of applications in the heavy lift, energy, defence, rigging, shipping, and general transportation sectors.
Connected to our wireless centre of gravity software (INSIGHT) the WNI load cell can be used to weigh and verify center of gravity of large and heavy objects which may not be evenly proportioned. The system will report weight on each individual load cell, total weight and C of G in an html report based on ISO19901.
Straightpoint WNI Wireless Compression Load Cells are machined from high grade 17-4PH stainless steel, providing excellent strength and corrosion resistance and making them suitable for the most arduous industrial conditions.
- Accuracy of 0.1% FS
- Environmentally sealed to IP67/NEMA 6
- Stocked capacities up to 1000t
- Industry leading wireless range up to 1000m or 3280ft
- Internal antennae
- ATEX & IECEx version for hazardous area zones 0, 1 & 2
- Battery life of 1200hrs
- Compact size
- Remote on-off
- Centre of gravity weighing and calculating
- Measurement of systems on and offshore such as jackets and modules
- Steel fabrication shops
- Port-side weighing bonded containers
- Structural monitoring with shoring props
- Lifting bridges and other large installations
- Heavy equipment moving companies
- Used alongside Self-propelled modular trailer (SPMT)
Straightpoint WNI Wireless Load Cells – In Use
Warranty & Assurance
- 2 year warranty
- Complies with ASME B30.26
- Design validated by F.E.A.
Supplied with the Following Standard
- AA Batteries
- Proof test certificate
- Operator Manual
- Carry/Storage Case
- IECEx SIR 16.0041X
- Sira 16ATEX2108X SW-HHP ATEX
- IECEx SIR 15.0072X
- Sira 15ATEX2196X
Straightpoint WNI Accessories
SW-OAM – Wireless overload alarm module
The SW-OAM is a wireless relay module featuring audio and visual warning indicators. The unit’s two set point alarms can be triggered from a single or summed group of up to eight Straightpoint wireless load cells. The SW-OAM is ideal as a Wireless Overload Detection System.
SW-BS – Wireless Base Station
The SW-BS, Crosby | Straightpoint base station, provides a configurable analog or digital output for any single or multiple (up to a maximum of four) Crosby | Straightpoint wireless load cells.
SW-AO1i – Wireless base station with analogue output
The SW-AO1i provides a configurable analog output for any single Straightpoint Wireless Load Cell and is ideal for integration to a PC, PLC or other Data Acquisition Systems. Housed in a NEMA 4 enclosure the output can be selected from pre-calibrated voltage and current ranges of 0-5vdc, +-5vdc, 0-10vdc, +-10vdc, 0-20mA, 4-20mA.
SW-SO – Serial output ASCII string module
Ideal for integration to a PC, PLC or other device requiring a simple RS232 serial input, this module allows for a user defined ACII string which can include individual or summed data from up to eight Straightpoint Wireless Load Cells.
INSIGHT – Multiple wireless load cell controller and centre of gravity software
INSIGHT software, supplied with an SW-D USB wireless dongle, allows connection of up to 126 Straightpoint wireless load cells simultaneously onto any Windows tablet or laptop.
SW-SD – Wireless slave display
This 100mm (4”) scoreboard LED display is wireless and viewable for up to 150 ft. Perfect for installation on a crane gantry the unit operates on 110-240 VAC and display’s an individual load or summed load for up to eight Straightpoint Wireless devices.
SW-SB – Wireless signal booster
The SW-SB signal booster/repeater module is battery operated and easily pairs to any Straightpoint Wireless device e.g. load cell, accessories, and software solutions within range, quickly increasing coverage and extending range.
SW-GW1 – Modbus RTU/ASCII Gateway
The SW-GW1 is a Modbus interface gateway that provides a simple interface allowing users to gather data from Straightpoint Wireless devices using either the standard Modbus RTU protocol or a simple ASCII protocol.