SPO Series Single Point Load Cell

£50.00

Load cells for off center loads, suitable for example to build CE-M approved scales with a single load cell with maximum dimensions of 300×300 mm.


CAPACITIES (kg): 3, 5, 10, 15, 20, 30, 40.


OIML R60. C3 precision class.


Aluminium alloy. IP67 protection.

Clear

Description

MAIN FEATURES

  • C3 PRECISION CLASS
  • OFF CENTER LOAD COMPENSATED
  • ALUMINIUM ALLOY CONSTRUCTION
  • IP67 PROTECTION
  • MAX. CAPACITIES FROM 3 TO 40 kg
  • FOR PLATFORMS WITH DIMENSIONS UP TO 300 X 300 mm
  • SHIELDED CONNECTION CABLE
  • OIML AND TEST CERTIFICATES AVAILABLE UPON REQUEST

TECHNICAL FEATURES

  • Minimum load cell verification interval: Vmin = EMax/15.000
  • Maximum number of verification intervals: nLC = 3000
  • Full Scale Output: 2mV/V +/- 10%
  • Temperature effect on zero: 0,01% FS/10K
  • Temperature effect on full scale output: 0,001%FS /10K
  • Compensated Temperature Range: -10°C/+40°C
  • Operating Temperature Range: -10°C/+50°C
  • Creep error after 30 minutes: 0,01% F.S
  • Maximum tolerated excitation voltage: 15 VDC
  • Input Resistance: 300..500 Ohm
  • Output Resistance: 300..500 Ohm
  • Insulation Resistance: >2000 MOhm
  • Safe Overload: 150% F.S.
  • Ultimate Overload: 300% F.S.
  • 4-wire shielded cable, 40cm long, 3,2mm diameter

ATEX Version

  • The CCATEX certificate makes the load cell suitable for use in hazardous areas with protection methods according to:
    ATEX II 1G Ex ia IIC T6 (Ta -20÷+40°C) TX (Ta -20÷+65°C) Ga
    ATEX II 1D Ex ta IIIC TX°C (Ta -20÷+40°C) TX°C (Ta -20÷+65°C) Da IP65.
    The certificate includes the manual and the ATEX CE conformity declaration (available in EN, DE, FR, and IT).
  • IMPORTANT: the certificate refers to the single load cell. For systems with more load cells, it is necessary to order one certificate for each load cell.
Please click here for data sheet…..

Additional information

Model:

SPO3 3kg, SPO5 5kg, SPO10 10kg, SPO15 15kg, SPO20 20kg, SPO30 30kg, SPO40 40kg