STG Series Tension Load Cells

From: £225.00

Tension or Compression approved load cells for the weighing hoppers, tanks, scales with levers, and with other weighing devices.


CAPACITIES (kg): 100, 500, 1000.


OIML R60. C3 precision class.


17-4 PH stainless steel. IP67 protection.

Clear

Description

MAIN FEATURES

  • C3 PRECISION CLASS
  • 17-4 PH STAINLESS STEEL CONSTRUCTION
  • IP67 PROTECTION
  • MAX. CAPACITIES FROM 100 TO 1000 kg
  • SHIELDED CONNECTION CABLE
  • TEST CERTIFICATE AVAILABLE UPON REQUEST

TECHNICAL FEATURES

  • Minimum load cell verification interval:
  • Vmin = EMax / 10.000 (for STG500 and STG1000 model);
  • Vmin = EMax / 7.000 (for STG100 model)
  • Maximum number of verification intervals: nLC = 3000
  • Combined error 0,03% of Full Scale Output (F.S.)
  • Non-Repeatability: 0,01% F.S.
  • Full Scale Output: 3mV/V +/- 0,08%
  • Temperature effect on zero: 0,017% /°C
  • Temperature effect on full scale output: 0,014% /°C
  • Compensated Temperature Range: -10°C/+40°C
  • Operating Temperature Range: -35°C/+65°C
  • Creep error after 30 minutes: 0,02% F.S.
  • Maximum tolerated excitation voltage: 18 VDC
  • Input Resistance: 430 ± 60 Ohm
  • Output Resistance: 350 ± 3.5 Ohm
  • Zero balance: +/-1% F.S.
  • Insulation Resistance: >5000 MOhm
  • Safe Overload: 150% F.S.
  • Ultimate Overload: 300% F.S.
  • 4-wire shielded cable, 6m long, 5 mm diameter

ATEX VERSION

  • The CCATEX certificate makes the load cell suitable for use in hazardous areas with protection methods according to:
    ATEX II 1G Ex ia IIC T6 (Ta -20÷+40°C) TX (Ta -20÷+65°C) Ga
    ATEX II 1D Ex ta IIIC TX°C (Ta -20÷+40°C) TX°C (Ta -20÷+65°C) Da IP65.
    The certificate includes the manual and the ATEX CE conformity declaration (available in EN, DE, FR, and IT).
  • IMPORTANT: the certificate refers to the single load cell. For systems with more load cells, it is necessary to order one certificate for each load cell.

Additional information

Weight 2.0 kg
Model:

STG100 100kg, STG500 500kg, STG1000 1000kg