DCP10M Single Desktop Controller Software For Straightpoint Load Cells and Crane Scales


Windows based software package. DCP10M simply plugs into the spare port on the loadcell and connects to a Windows
based PC, laptop or tablet.

This easy to use software allows the operator to view live loads, control the loadcell on screen and then log data using either
of two methods

The desktop controller datalogging software allows you to view and control (tare, peak hold etc) live loads on the PC screen and log the data into a .CSV file at a speed of up to 10Hz.


The first method allows the operator to set up a time interval and then load data directly into a .csv file by time and date as the test is happening. The file can then be opened in Microsoft Excel and the data analysed; this is especially useful for dynamic load monitoring applications.

Secondly, the software will allow the operator to generate a single load report within Microsoft Word – this report details the load applied and the time and date of test. This function is very useful in testing applications where an ultimate load needs to be achieved and recorded.

DCP10M is supplied with a 10 metre or 30 foot cable assembly, other lengths are available on application. A spare USB port
is required.


  • Software formatted for use on Windows based laptop or tablet
  • High speed digital signal from load cell to Windows based device
  • Data logging by time and date into spreadsheet or single reading report generator
  • Can connect to any self indicating Straightpoint load cell
  • Low cost, high power solution from Straightpoint

Please click here for data sheet …..