Description
FUNCTIONS FOR HUB CANOPEN UP TO 16 WEIGHING SCALES
- This configuration allows to check, at the same time, all the data of the weighing scales network by CANOPEN protocol.
In detail:
– NET weight and GROSS weight of the scales
– Weight status (for example, positive, negative, stable, unstable)
– Error condition (es. overload, underload)
– DIGITAL INPUT status
– RELAY OUTPUT status
CANOPEN CONVERTER FOR SINGLE WEIGHING SCALE
- By connecting the CANOPEN to the weighing scale or by selecting one from the scales network, the CANOPEN protocol transmits specific data and controls:
– NET weight, GROSS weight and TARE of the weighing scale
– Weight status (for example; positive, negative, stable, unstable)
– Error condition (es. overload, underload)
– DIGITAL INPUT status
– RELAY OUTPUT status
– SETPOINT output writings
– Aliby Memory
– Calibration
– Configuration SETUP
CANOPEN FOR WEIGHING SCALES: MAIN FEATURES
- Hub function for a simultaneous check of up to 16 weighing scales.
- CANOPEN slave port.
- ABS case for panel mounting on DIN bar.
- Indexing from 1 to 127.
- Baud Rate from 10KBaud to 1MBaud.
- Suitable to function with DGT1S weight transmitter. Quick configuration from the transmitter programming menu.
- Serial port RS485 (from 9600 to 115200 baud), with “quick connect” system for a fast connection.
- Power source: 12-24Vdc.
Please click here for the CANOPEN interface for single scale or weighing scales network Datasheet…