DEVICENET interface for weighing scales network or single weighing scale

£315.00

DEVICENET interface permits a simultaneous communication between 16 digital weighing scales, reducing the installation costs of a weighing system.

Clear

Description

DEVICENET CONVERTER FOR SINGLE WEIGHING SCALE

  • By connecting the DEVICENET to a single weighing scale or by selecting one from the scales network, the DEVICENET protocol transmits the following data and controls:
    – NET, GROSS and TARE weight
    – Weight status (for example; positive, negative, stable, unstable)
    – Error condition (es. overload, underload)
    – DIGITAL INPUT status
    – RELAY OUTPUT status
    – SETPOINT output writings
    – Aliby Memory
    – Calibration
    – Configuration SETUP

DEVICENET HUB FUNCTION, UP TO 16 WEIGHING SCALES

  • This configuration permits to monitor simultaneously all the data of the weighing scales network by DEVICENET protocol.
    In detail:
    – NET weight and GROSS weight of the scales
    – Weight status (for example, positive, negative, stable, unstable)
    – RELAY OUTPUT status
    – DIGITAL INPUT status
    – Error condition (e.g. overload, underload)

MAIN FEATURES OF DEVICENET FOR WEIGHING SCALES

  • Hub function for a simultaneous check of up to 16 weighing scales.
  • DEVICENET slave port.
  • ABS case for panel mounting on DIN bar.
  • MAC ID from 0 to 63.
  • Baud Rate from 125KBaud to 500KBaud.
  • Suitable to function with DGT1S weight transmitter. Quick configuration from the transmitter programming menu.
  • Serial port RS485 (from 9600 to 115200 baud), with “quick connect” system for a fast connection.
  • Power source: 12-24Vdc.

Please click here for the┬áDEVICENET interface Datasheet…

Additional information

Model

DEVICENET1S – RS485 to DeviceNET interface, for DIN rail mounting.

You may also like…