FT-200 Series Filling Machine for Conveyor Systems

S/L Name:

The FT-200 series filling machine has been designed for filling 20ltr containers, barrels, pails, 200ltr drums or IBC’s, but will basically fill anything up to 1000ltrs.

The FT-200 has been specifically designed to be used with a conveyor system that do not require access for an operator to walk upon. The FT-200 will fill anything from 20lts through to 1000ltrs plus.

Designed initially for use with conveyor systems but also very useful when filling Hazardous/dangerous products where fumes or splashing can be a problem.

Description

Features

  • Easy strip down nozzle for cleaning
  • Multi-On-Pallet
  • Suitable for none foaming (Top Fill) & foaming (Bottom Fill)
  • Weights and Measures (DTI) approved
  • Mobile platforms complete with wheels or fork lift points
  • ATEX compliant
  • Interfaced with weigh platform, flow meter or mass flow meter
  • Choice of weigh indicators / platforms or alternatively use your existing equipment
  • Internal opening nozzle for open top containers / pails (optional)

Capacity

Weigh range of 20ltr – 1000ltr+

  • 16 x 20ltr/25ltr containers (max 2 layers total of 32 per pallet)
  • 4 x 205ltr drums
  • 1 x 1000ltr IBC container

Filling Nozzle
The filling nozzle is made from 316 stainless steel as standard, we can also manufacture these in PVDF, PVC, HASTELLOY and PTFE, there are 2 types of filling nozzle; external opening (fitted as standard) or internal opening (used on open top pails/drums), these can be either top fill for non-foaming products or bottom fill for foaming.

Lift with Weight
When using our bottom fill nozzle we have the capability of a lift with weight operation, using our standard indicator you can adjust the target weight to control the lift set points, enabling you to keep the filling nozzle out or In of the product as much as you require.

Overfill Protection
The overfill protection system is designed into the filling nozzle; this system would/could be used as a fail safe shut off should there be a fault during a fill or to stop you filling the same container twice.

Nitrogen Purge
The nitrogen purge system has been designed into the filling lance and is used prior or during a fill process.

Clip Attachments
The CIP attachment is connected onto the bottom of our filling lance to enable the waste product/water that is used to clean through the system to be dispersed into a waste container or drain.

Fume Extraction
We have available 2 types of extraction hoods that we can fit, these fit around the filling nozzle sitting just above the bung hole.

Pumps
All of our filling machines can be interfaced with a variety of pumps whether new or existing.

Skid Mounted / Mobile
The skid is designed to be movable there are a few options below:-

  • Built with fork lift truck mountings + leveling feet
  • Built with wheels + leveling feet
  • Built on a base to hold a pump and fixed directly to the floor.

Flexable Hose
Flow Tronix Ltd. can also provide flexible hoses for all needs such as Flange, BSP and Union Clamp end connections, various braiding and internal linings available.

Earth-Rite Systems
The Earth-Rite PLUS is an extremely versatile system that may be used to monitor static earth conditions on a wide range of plant equipment, including Mobile Tanks, Railcars, IBC’s, Drums and Containers.

Conveyor Systems
Our filling systems can be interfaced in to conveyor systems either Powered or gravity.

Please click here for the FT-200 filling system technical drawing …..