“DGTPKF” Microcontroller For Industrial Dosage Systems With Extended Keyboard

From: £410.00

High performing microcontroller, for table or panel mounting; through simple programming of the parameters, it offers the possibility to manage single product dosage systems in loading or in unloading, or multiproduct dosages and mixtures.

Clear

Description

MAIN FEATURES

  • 20-key numeric/fundtional waterproof keyboard: quick entry of the setpoints and the tare value.
  • Highly efficient red LED display with 6 20-mm digits and 12 LEDs for showing active functions.
  • Stainless steel case for panel mounting.
  • Frontal panel in alluminium, with protection gasket.
  • Fitted with stainless steel bracket, for bench use or fixing to wall.
  • A/D 24-bit sigma-delta conversion, up to 200 conv./sec. autoselect.
  • Management of a weighing system from 1 to 4 channels (cells) with digital equalization.
  • Connectable with up to 16 analogue load cells with 350 Ohm input resistance.
  • Up to 1.000.000 displayable divisions with internal resolution up to 3.000.000 points.
  • Calibration, Set-Up parameters, configurable from keyboard or from PC with DINI TOOLS.
  • Up to 8 signal linearization points with DINITOOLS (3 from keypad).
  • Time/Date
  • Memory back-up for recording dosage data in case it’s accidentally turned off.
  • Printing the dosage and consumption data.
  • From 12 Vdc to 24 Vdc power supply.
  • Fitted with 12 V switching power adapter.

MAIN CERTIFICATIONS

  • EU Type Examination Certificate (45501:2015)
  • OIML R76
  • OIML R61 – MID
  • OIML R51

I/O SECTION

  • 1 RS232/C or RS485 bidirectional port configurable for connection to PC or external units.
  • 1 RS232/C bidirectional port configurable for connection to printer.
  • Six 150 mA 48 Vac / 150 mA 60 Vdc (NO) photomosfet outputs configurable according to the selected dosage function.
  • 6 photomosfet outputs: 150 mA 48 Vac / 150 mA 60 Vdc (NO), with configurable functions.
  • 4 inputs (optoisolator photocouplers) configurable as: 12÷24 Vdc, 5 mA min – 20 mA max with functions dependent on the selected dosage function.
  • Analogue 16 bit output (only for DGTPKFANV2 model), configurable as 4-20mA, 0-5Vdc or 0-10Vdc. Maximum load applicable on the output current: 350Ohm. Minimum load applicable on the output voltage: 10kOhm.

Please click here for the “DGTPKF” Microcontroller For Industrial Dosage Systems With Extended Keyboard Datasheet…

Additional information

Model

DGTPKFV2, DGTPKFANV2

You may also like…