SPO Single Point Load Cell

From: £59.00

Load cells for off center loads, suitable for example to build CE-M approved scales with a single load cell with maximum dimensions of 300×300 mm.

CAPACITIES (kg): 3, 5, 10, 15, 20, 30, 40.

OIML R60. C3 precision class.

Aluminium alloy. IP67 protection.


Main Features

  • C3 Precision Class
  • Off Center Load Compensated
  • Aluminium Alloy Construction
  • IP67 Protection
  • Maximum Capacities from 3kg to 40kg
  • For platforms with Dimensions up to 300mm x 300mm
  • Shielded Connection Cable
  • OIML and Test Certificates Available upon Request

Technical Features

  • Minimum load cell verification interval: Vmin = EMax/15.000
  • Maximum number of verification intervals: nLC = 3000
  • Full Scale Output: 2mV/V +/- 10%
  • Temperature effect on zero: 0,01% FS/10K
  • Temperature effect on full scale output: 0,001%FS /10K
  • Compensated Temperature Range: -10°C/+40°C
  • Operating Temperature Range: -10°C/+50°C
  • Creep error after 30 minutes: 0,01% F.S
  • Maximum tolerated excitation voltage: 15 VDC
  • Input Resistance: 300..500 Ohm
  • Output Resistance: 300..500 Ohm
  • Insulation Resistance: >2000 MOhm
  • Safe Overload: 150% F.S.
  • Ultimate Overload: 300% F.S.
  • 4-wire shielded cable, 40cm long, 3,2mm diameter

Please click here for the ATEX version of the Dini Argeo SPO single point load cell.

Please click here for the SPO single point load cell datasheet …..

Additional information

Weight 2.0 kg

SPO3 3kg, SPO5 5kg, SPO10 10kg, SPO15 15kg, SPO20 20kg, SPO30 30kg, SPO40 40kg